I te tīmatanga o te tau 2026, i whakangao te Pokapū Hangarau Mold o PXID (Huai'an PX Intelligent Manufacturing Co., Ltd.), kei Huai'an, Jiangsu, i te neke atu i te RMB 10 miriona ki ngā taputapu me ngā pūnaha hangarau hei hanga i tētahi kaha whakauru e kapi ana ite hoahoa pokepokea ai, te miihini CNC, te tukatuka tika, te whakamātautau pokepokea ai werohanga, me ngā pūnaha tirotiro katoa.
Hei kamupene e arotahi ana ki te whakawhanake me te hanga i ngāngā pahikara hiko (ngā pahikara-e), mā tēnei whakahoutanga ka whakapakari ake i ngā āheinga hanga pokepokea o roto o PXID. Ko te whāinga he whakaratotautoko hangarau pumau ake me te whakapumautanga kounga ponomō ngā kiritaki waitohu me ngā mahere whanaketanga hua hou tonu me ngā whakaritenga whakaputa nui.
Whakapai Ake i te Pūmanawa Hoahoa Pokepokea: Te Whakapūmau i te Angitu o te Whakaputa mai i te Wāhanga Hoahoa
Mō ngā hua pahikara hiko, ko ngā wāhanga hanganga kirihou pēnei i tengā whare pākahiko, ngā whare whakahaere, me ngā taupoki o wahoe hiahiatia ana he tino tika me te mahi tahi me te whakakotahitanga.
I te tīmatanga o ia kaupapa, ka whakahaerehia e te PXID Mold Engineering Center he arotake pūnahaTātaritanga DFM (Hoahoa mō te Hanganga)Kei roto i tēnei aromatawai ko ngā tere whakaheke rauemi, te taurite rere, te tahora pūnaha whakamatao, me te hoahoa hanganga wehewehe.
Hei tāpiritanga, ka whai whakaaro katoa te tukanga hoahoa ki te mahi a te hua i raro i tengā taiao o waho e kino ana, me ngā pāmahana whakahaere e rerekē ana i te–40°C ki te 60°C, kia mau tonu ai te huihuinga tika me te mahi pumau o ngā wāhanga hanganga ahakoa i ngā āhuarangi kino rawa.
Mā te arotaungā reti, ngā kaitapahi, me ngā hanganga whakauru, me te whakapai ake i ngā otinga whakamatao me te whakaputa hau, ka whakaitihia e PXID ngā mōrearea pēnei i tete mimiti, te whakarerekētanga, me te hanganga murai te wā o te hoahoa pokepokea ai.
Ka whakapiki ake ēnei whakapainga i te reiti tohu mō te pokepokea ai mā te15%–20%, whakapai akeNgā reiti angitu o te whakamātautau T1, ā, whakapotoa tete huringa whakaurunga hua hou (NPI).
Te Mahere Mīhini CNC Waenga me te Nui: Ngā Taputapu Tauine e Whakarite ana i te Tukunga Pūmau
Te whakapai akePūnaha miihini CNCe hipoki ana ināianeite miihini anga, te miihini poutū, me te whakairo tere-tiketike, e tautoko ana i te hanga motuhake o ngā pokepokea reo me te rahi mō ngā hua pahikara hiko.
He Tirohanga Whānui mō ngā Taputapu CNC ā-Roto a PXID
| Tauira Taputapu | Te rahinga | Te Tika o te Mīhini (Te Tūnga / Te Whakahokinga) | Te Haerenga Mīhini | Pūnaha Whakahaere | Tere Mōrahi o te Miro |
| Yonglida CNC VH11 | 4 | ±0.013mm / ±0.01mm | 1100mm × 500mm × 500mm | Mōkihi 0i-MF Tāpiri 3 | 8000 rpm |
| KAFO SV105 | 2 | ±0.008mm/ ±0.005mm | 1020mm × 520mm × 640mm | Mōkihi 0i-MF Tāpiri 1 | 12000 rpm |
| CHEVALIER LM2013 | 1 | ±0.015mm / ±0.005mm | 2000mm×1300mm×600mm | Siemens828D | 6000 rpm |
| CHEVALIER HSD1615 | 1 | ±0.01mm / ±0.005mm | 1600mm×1500mm×800mm | Siemens828D | 20000rpm |
| Jingdiao JDLVT500 | 1 | ±0.005mm / ±0.003mm | 550mm × 400mm × 350mm | Pūnaha Whakahaere CNC Raupapa JDSoft | 24000rpm |
●Ngā pokapū miihini poutūwhakamahia teRaupapa SV KAFO (Taiwan), e whakaatu ana i te hoahoa hanganga pakari-teitei e tika ana mō te tapahi tere-teitei o te maitai pokepokea ai.
●Ngā pokapū miihini gantryte tango i ngā tauira tere-teitei mai iCHEVALIER, kua rite rawa ki tePūnaha whakahaere Siemens 828D, e tutuki ana i ngā whakaritenga mō te miihini pumau o ngā pokepokea nui.
●Ngā taputapu whakairo me te mira tino tikae whakamahi ana i ngā pokapū miihini tere-teitei a Jingdiao, me ngā tere porotaka mōrahi tae atu ki te24,000 rpm, e tika ana mō ngā kakano angiangi, te whakairo waitohu, me te miihini wāhanga hanganga iti.
E whakamahia whānuitia ana ēnei waitohu taputapu puta noa i te umanga hanga pokepokea ai, ā, ko ēnei ngā otinga matua mō te tukatuka pokepokea ai he tino tika.
Mā te whakauruhe maha ngā waitohu me ngā momo miihini i roto i tētahi pūnaha whakaputa kotahi, kua whakatūria e PXID ngā āheinga miihini whānui e kapi anangā wāhanga hanganga nui o te pokepokea ai me ngā kōhao matatini me te tika.
Mā tēnei whirihoranga ka taeate hanga pokepokea motuhake me te whakaritenga whakaputa kua whakaritea, e whakanui ana i te pai o te hanga pokepokea a PXID mā te tata ki200%.
Pūnaha Mīhini Tika:Te Whakapai Ake i te Mana Whakahaere Manawanui Taumata-Micron
I roto i ngā hua pahikara hiko utu nui (E-bike),te tika o te huihuinga hanganga me te mahi hirie whakawhirinaki tika ana ki te tika o ngā pokepokea ai.
Hei whakatutuki i ngā whakaritenga teitei mō te tika me te hototahi o te huihuinga oNgā wāhanga o waho o te pahikara hiko me ngā wāhanga mahi, kei a PXID ngā taputapuMīhini Tukunga Hiko (EDM)mengā pūnaha EDM tapahi waea tere-waenga, e āhei ai te miihini tika o ngā whakaurunga uaua me ngā wāhanga hanganga nui.
He Tirohanga Whānui mō ngā Taputapu EDM ā-Roto a PXID
| Tauira Taputapu | Te rahinga | Te Tika o te Mīhini (Te Tūnga / Te Whakahokinga) | Te Haerenga Mīhini | Te Whakaotinga Mata Pai rawa atu | Momo Puku |
| Hanba CNC EDM G45L | 1 | 0.003mm | 450mm × 300mm × 300mm | Ra ≤ 0.2 μm | Puku Mōta Raina |
| Dimon CNC EDM ADI600 | 1 | 0.005mm | 600mm × 400mm × 350mm | Ra ≤ 0.08 μm | Puku Mōta Raina |
He Tirohanga Whānui mō ngā Taputapu Tapahi Waea Tere-Waenga o roto o PXID
| Tauira Taputapu | Te rahinga | Te Tika o te Mīhini (Te Tūnga / Te Whakahokinga) | Matotoru Tapahi Mōrahi | Koki Whakawhāiti Mōrahi | Pūnaha Taraiwa / Pūnaha Haere Tuaka | Matotoru Tapahi Mōrahi |
| Baqi Waea-Tapahi EDM BQ800 | 1 | ≤±0.005 mm | 380 mm | ±6° /80 mm | 800mm×600mm×400mm | ≤ 1.0 μm |
| Ruijun Wire-Cut EDM FR600XS (Pro) | 1 | ≤±0.005 mm | 260 mm | ±15° /80 mm | 600mm×400mm×300mm | ≤ 0.8 μm |
Mā te whakahaere tahi i roto i tepūnaha miihini tino tika, ka taea e ngā whakaurunga uaua me ngā wāhanga reti te whakatutukite mana whakahaere manawanui i te taumata 0.01 mm. Ka tino whakaitihia e tēnei ngā mōrearea pēnei i tete hanganga o te mura me te pupuhi, me te whakapai ake i tete pumau me te roa o te mau o ngā pokepokea ai.
Te Kaha o te Tauira Whakarewa Werohanga ā-Whare: Te Kati i te Porowhita Hangarau
Kei te PXID ngā taputapuNgā mīhini whakarewa werohanga o Haitimai i Ningbo. Ko Haitian, hei tētahi o ngā kaihanga mīhini werohanga matua o te ao, e whakamahia whānuitia ana i roto i tete hanga motuka me te hanga tikangā ahumahi. Te hipoki i teTe awhe taumaha o te 90T ki te 530T, ka taea ai te mahi i roto i te wharete hanga tauira me te manatoko hanganga.
E whakawhirinaki ana ki tōna āhua o rotopūnaha hanga tauira, ka taea e PXID te whakamana teremahi hangangame te hangangā whakatikatika arotaui teNgā wāhanga T0/T1, te whakapoto i tehuringa whakarerekētangame te whakapai akete whai huatanga o te whakaurunga hua hou.
He Tirohanga Whānui mō ngā Taputapu Whakarewa Werohanga ā-Whare o PXID
| Tauira Taputapu | Te rahinga | Momo tīwiri | Te kaha werohanga ariā (cm³) | Matotoru Iti/Mōrahi o te Momo | Ngā horopaki tono |
| 90T（MA900Ⅲ/280SE) | 4 | He | 120 | 150/360 | Ngā wāhanga kirihou iti me ngā wāhanga hiko/hiko tino tika |
| 120T（MA1200Ⅲ/400SE) | 1 | He | 173 | 150/430 | |
| 250T（MA2500/1000G II) | 1 | B | 570 | 220/580 | Ngā panera tinana, ngā wāhanga hanganga rahi-waenga, me ngā wāhanga mahi |
| 260T（MA2600ⅢSE) | 1 | He | 617 | 220/570 | |
| 260T（MA2600ⅢSE) | 1 | He | 1423 | 320/780 | Ngā wāhanga hanganga nui, ngā wāhanga pakitara matotoru, me ngā pokepokea maha-kōhao nui |
| 530T（MA5300/4000GⅡ) | 1 | B | 2496 | 350/850 |
Te Whakahaere Hangarau me te Tikanga Whakamana: Te Whakatū i tētahi Porowhita Kati mō te Whakawhanaketanga Pokepoke Katoa
E whakawhirinaki ana ki tanate hoahoa ā-roto, te miihini, me ngā āheinga hanga tauira, kua whakatūria e PXID tētahi tukanga porowhita-kati:
Arotake Hanganga → Mana Mīhini → Patupatu Huihuinga → Hanga Tauira T1 → Whakaū Arotau → Whakataki Hanganga Papatipu
MatatauNgā pūnaha Whakahaere Whakahaere Hanga me te Huringa Ora o te Hua (MES/PLM)kua whakaurua mai hei whakahaere tika i ia wāhanga:
●Te Tīmatanga o te Kaupapa:whanongaaromatawai mōrearea hangangame te whakaūkōwhiringa rauemi
●Wāhanga Hanga: Whakatinanatohu paetaearotakeme te whakahaere ahunga whakamua
●Te Hanga TauiraWāhanga:Tuhia ngā take me te whakahaeremana whakahaere putanga
●Wāhanga Whakamutunga:Otite whakatio hanganga hanga papatipu
Mā roto ite tuhi raraunga pūnahamewhakahaere hangarau, Ka whakarite a PXID i te whai i te tukanga whanaketanga pokepokea aipurangi hiko puta noa i te tukanga whakawhanake, ka whakaiti i ngā reiti hapa pokepokea ai mā te tata ki20%-25%, me te whakamana hoki i te kaha tuku pumau mō te wā roa.
Pūnaha Tirotiro Kounga: Te Whakapūmautanga Tuturu e Aroturukihia ana e ngā Raraunga
Kei te PXID Mold Engineering Center ngā taputapuNgā CMM raupapa INSPEC o te Hexagon Manufacturing Intelligencenō Huitene.
He hexagonkaiwhakarato otinga ine tika matua o te ao, e whakamahia whānuitia ana i roto i tewakamete hangahanga teiteingā rāngai.
He Tirohanga Whānui mō ngā Taputapu CMM ā-Roto a PXID:
| Tauira Taputapu | Te rahinga | Te Tika o te Mīhini | Awhe Ine | Ngā horopaki tono |
| Hexagon CMM INSPEC70RS10.15.08 | 1 | MPE = ±(2.8 + L/300) μm | 1000mm × 1500mm × 800mm | Ngā wāhanga motuka, ngā pokepoke taputapu kāinga, ngā wāhanga mīhini |
Ka pāngia ngā pokepoke katoa ete ine-toru-ahu me te penapena raraunga i mua i te huihuinga, te whakarite kia tutukihia ngā whakaritengangā whakaritenga hoahoaMā roto i tētahite whai i te kounga o te tukanga katoapūnaha, ka whakaratohia e PXIDte whakaputanga papatipu pumaumō ngā pokepokea ai pahikara hiko.
Mō ngā kiritaki, ko te tikanga tēnei:
✔Te whakapumautanga o te ōritetanga o ngā āhuatanga
✔Te kaha tuku pumau mō te wā roa
✔Te mōrearea whakahaere i roto i te whakaputanga nui
Mai itauira hangahanga ki te whakaputa papatipu, ngā taputapu PXIDte whai i te kounga mai i te mutunga ki te mutunga, te whakaritete tuku pono mō te wā roa.
Ka whakapai tonu a PXID i anangā āheinga hanga pokepokea ai te pahikara hiko, te whakaratongā pūnaha hoahoa whakauru, mīhini, me te whakamana hangarauki te tukutautoko hangarau mō te wā roa, pumaumō ngā kiritaki waitohu.
Mena kei te rapu koe i tētahihoa hanga pokepokea ai-pahikara hiko me ngā āheinga tukatuka tauine me te pūnaha pokepokea tauira katoa, e mihi ana a PXID ki ētahi atu kōrero hei tūhura i ngā whai wāhitanga mahi tahi.
Ngā Pātai Auau
I te wā e whiriwhiri ana i tētahi kaihanga pokepokea ai he pahikara hiko, me arotake e ngā waitohu te kaha hoahoa hangarau, te kaha miihini CNC, te hangarau tukatuka tika, me te mea kei te tukuna e te kaiwhakarato ngā whakamātautau pokepokea ai werohanga ā-whare. I PXID, ka whakauruhia e tā mātou pokapū hangarau pokepokea ai te hoahoa pokepokea ai, te miihini, ngā whakamātautau pokepokea ai, me te tirotiro, hei āwhina i ngā waitohu pahikara hiko ki te whakaiti i ngā mōrearea whanaketanga me te whakapai ake i te pumau o te whakaputa papatipu.
Ko te whakawhanaketanga o te pokepokea ai mō ngā wāhanga pahikara hiko he tikanga whānui te tātari hoahoa (DFM), te miihini CNC, te tukatuka tika, te huihuinga pokepokea ai, me ngā whakamātautau pokepokea ai werohanga. E whai ana a PXID i tētahi tukanga hangarau porowhita-kati e uru ana ki te aromatawai hanganga, te whakahaere miihini, ngā whakamātautau pokepokea ai T1, me te whakamana whakaputa hei whakarite kia tutuki i ngā pokepokea ai ngā whakaritenga hangahanga nui.
Mā ngā whakamātautau pokepokea werohanga ka taea e ngā kaihangarau te manatoko i te hanganga wāhanga, te mahi rauemi, me te tika o te huihuinga i mua i te hanga papatipu. Mā ngā mīhini werohanga o roto mai i te 90T ki te 530T, ka taea e PXID te mahi tere i ngā whakamātautau T0 me te T1, ka whakaiti i ngā huringa whakarerekētanga me te whakateretere i ngā wā whakarewatanga hua mō ngā waitohu pahikara hiko.
Ko te hanga pokepokea kounga teitei e hiahia ana ki ngā pokapū miihini CNC matatau, ngā pūnaha EDM, ngā mīhini tapahi waea, me ngā taputapu ine tika. Ka whakamahi a PXID i ngā mīhini CNC maha-waitohu, ngā taputapu EDM, me ngā pūnaha tirotiro Hexagon CMM hei whakarite i te tika o te miihini taumata-micron me te kounga pokepokea rite tonu.
Ko te pumau o te mahi pokepokea ai e whakawhirinaki ana ki te miihini tika, te whakahaere hangarau hanganga, me te tirotiro kounga tino pakari. Ka whakatinanahia e PXID ngā pūnaha MES me PLM hei whakahaere i te huringa ora katoa o te whanaketanga pokepokea ai, ko te ine CMM ka whakarite i te tika o ngā āhuatanga i mua i te whakaurunga o ngā pokepokea ai ki te hanga papatipu.
Mō ētahi atu kōrero mō PXIDNgā ratonga ODMmengā take angituo ngā hoahoa me te hanga o ngā pahikara hiko, ngā motopaika hiko, me te kuta hiko, tirohia maihttps://www.pxid.com/download/
rāneiwhakapā atu ki tā mātou tīma ngaio kia whiwhi ai i ngā otinga kua whakaritea.
Pukamata
Twitter
Youtube
Instagram
Linkedin
Behance
tiktok
