scooter design,electric bicycle design,electric scooter,electric bicycle
If you need us to help you design, please call us 400-853-2909.

PXID teaches you how to install an anti-theft device for electric vehicles!

pxid 2019-12-20 289 times

PXID teaches you how to install an anti-theft device for electric vehicles!

First check whether your electric vehicle controller is equipped with the anti-theft device function and see if the controller has the two sets of wires below.

PXID teaches you how to install an anti-theft device for electric vehicles!

The two sets of wires are obviously the power line of the anti-theft device is red and black, and the other is the function line of the anti-theft device. Generally, orange or yellow is the remote control power on line, blue is the lock motor line, and green is the signal line. Sometimes the color of the cable is uncertain, but the orange or yellow open source power cable must have one.

PXID teaches you how to install an anti-theft device for electric vehicles!

After the conditions are met, we can directly install it. First plug in the power cord to see if the color is correct. If it is not right, reverse it, and then connect another group of orange or yellow power cords to see if there are blue or blue wires. The wire is the lock motor wire. If there is, connect it directly. If not, connect the remaining two wires at will. Try it out with the remote control. If the functions are effective, they will be successful. If not, connect the most. The remaining two lines will definitely be fine after being reversed.

YOU MAY ALSO LIKE